VIFLY Finder 2
VIFLY Finder 2 is the most intelligent drone buzzer. It is Self-powering to work even after the quad battery ejection.
Advanced ViSense Technology
- With ViSense-based technology, the Finder 2 can power itself to beep even the quad battery has been ejected. Even more, the built-in light sensor can detect light intensity and then smartly control the LED light to flash. Besides, it enables the buzzer to automatically enter into sleep mode at night to save power and not disturb.
Much Louder than Standard Buzzer
- To easily find the lost drone in long-distance, the VIFLY Finder 2 buzzer is designed to install a very loud beeper that the DB is over 100.
Two Options to Disarm the Buzzer
- Option 1, Disarm with button: Disconnect the main battery, hold disarm button on VIFLY Finder 2 for 1-5 seconds then release. Option 2, Disarm with main battery: Disconnect the main battery, then connect the main battery for 3-6 seconds and disconnect it again.
It will beep 3 times when disarmed successfully.
Compatible with Both FPV quadcopter and RC Airplane
- VIFLY finder 2 is programmed to be compatible with any flight controllers to support FPV quad and receivers for RC airplanes. No extra setting required it will automatically recognize the device to connect.
Simply connects the VIFLY Finder 2 to your flight controller(racing drone) or receiver(RC airplane) via 3 wires, and it’s ready to enjoy your flight.
Size(L x W x H): 24x13x16 mm Weight: 5 grams Volume: Up to 105 dB Working Time: Up to 30 hours Charge Time: 1.5 hours Battery: 80mAh LiPo Input Voltage: 4.5 – 8.5 V
First 30 seconds 30s to 2 hours After 2 hours Low volume Max volume every 6s every 12s / idle until dawn