VIFLY Finder 2

VIFLY Finder 2

VIFLY Finder 2 is the most intelligent drone buzzer. It is Self-powering to work even after the quad battery ejection.

Advanced ViSense Technology

With ViSense-based technology, the Finder 2 can power itself to beep even the quad battery has been ejected. Even more, the built-in light sensor can detect light intensity and then smartly control the LED light to flash. Besides, it enables the buzzer to automatically enter into sleep mode at night to save power and not disturb.

Much Louder than Standard Buzzer

To easily find the lost drone in long-distance, the VIFLY Finder 2 buzzer is designed to install a very loud beeper that the DB is over 100.

Two Options to Disarm the Buzzer

Option 1, Disarm with button: Disconnect the main battery, hold disarm button on VIFLY Finder 2 for 1-5 seconds then release. Option 2, Disarm with main battery: Disconnect the main battery, then connect the main battery for 3-6 seconds and disconnect it again.

It will beep 3 times when disarmed successfully.

Compatible with Both FPV quadcopter and RC Airplane

VIFLY finder 2 is programmed to be compatible with any flight controllers to support FPV quad and receivers for RC airplanes. No extra setting required it will automatically recognize the device to connect.

https://www.youtube.com/watch?v=h37RB8vOI6g

Wiring Diagram

Simply connects the VIFLY Finder 2 to your flight controller(racing drone) or receiver(RC airplane) via 3 wires, and it’s ready to enjoy your flight.

Technical Specifications

Size(L x W x H):	24x13x16 mm
Weight:	5 grams
Volume:	Up to 105 dB
Working Time:	Up to 30 hours
Charge Time:	1.5 hours
Battery:	80mAh LiPo
Input Voltage:	4.5 – 8.5 V

Alarm Pattern

First 30 seconds	30s to 2 hours	After 2 hours
Low volume	Max volume every 6s	every 12s / idle until dawn